Texas Instruments TMS320DM6467 DVEVM, Getting Started Manual, Page: 39 / 72

Installing the Software
DVEVM Software Setup 4-7
This creates the MontaVista directory structure under the
/opt/mv_pro_5.0/montavista/ directory.
Note that unpacking these tar files will overwrite any existing files that
were previously installed.
Note: The LSP shipped with the DVSDK is a multi-platform LSP; it
is not configured for a particular platform. As shipped, this LSP
cannot be used to build the demo or example applications. It must
first be copied to a user area and configured/built for the EVM.
Please see Section 4.5 for instructions.
4.3.2 Installing the DVSDK Software
The DVSDK software includes Codec Engine components, DSP/BIOS
Link, sample data files, xDAIS and xDM header files, and a contiguous
memory allocator for Linux (CMEM).
Note: The installers for DSP/BIOS and Code Generation Tools
(codegen) have a different default installation location. However,
we strongly recommend that you change the default installation
locations to place the components together (if you have not already
installed the Linux versions of these components elsewhere). This
simplifies the build setup steps.
To install the DVSDK software using the Linux installer, follow these
steps:
1) Log in using a user account . The user account must have execute
permission for the dvsdk_setuplinux_#_#_#_#.bin and
xdctools_setuplinux_#_#_#.bin files. In order to do this, you must
switch to "root" on the host Linux workstation, change the
permissions of the files, and switch back to your user account. For
example:
host $ su root
host $ chmod 777 dvsdk_setuplinux_#_#_#_#.bin
host $ chmod 777 xdctools_setuplinux_#_#_#.bin
host $ su < user >
2) Execute the DVSDK installer that you previously copied from the
DVSDK DVD. For example:
host $ cd /tmp
host $ ./dvsdk_setuplinux_#_#_#_#.bin