Texas Instruments TMS320DM6467 DVEVM, Getting Started Manual, Page: 38 / 72

Installing the Software
4-6
4.3.1 Installing the Target Linux Software
This section explains how to install Linux for use on the target board. This
is a demonstration version of MontaVista Linux Pro v5.0.
Note that separate versions of Linux are used by the target and your host
Linux workstation. The following Linux host operating system is tested
with the DVEVM: Red Hat Enterprise Linux v4 (Server Edition).
To install the Linux software, follow these steps:
1) Log in as root on your host Linux workstation. This will allow you to
successfully run the graphical installer to install MontaVista Linux.
Note: If you are logged in with any account other than root, log out
from your workstation (by issuing the
exit
,
logout
or
logoff
command (depending on your Linux distribution). Then login again
as root.
2) We suggest that you create a directory called /opt/mv_pro_5.0 using
the following command. This will be the directory into which you
install the software.
host $ mkdir /opt/mv_pro_5.0
3) Execute each of the following bin files (where
#_#_#_#
is the current
version number) from the temporary location that they were copied in
order to extract the installers for the Linux tools, Linux kernel, and the
file system. If a bin file does not run, make sure these files are
executable (use
chmod +x *.bin
).
Instead of the default installation directory, change the installation
directory to the new directory you created in the previous step.
host $ ./mvl_5_0_ # _demo_sys_setuplinux.bin
host $ ./mvl_5_0_0_demo_lsp_setuplinux_ #_#_# _ # .bin
4) After you execute these .bin files, make sure the following files are
located in /opt/mv_pro_5.0 (or in the /mv_pro_5.0 subdirectory of the
directory you chose in place of the default):
■
mvltools5_0_#######.tar.gz
■
DaVinciLSP_#_#_#_#.tar.gz
5) Go to the location where you will unpack the tar files. For example:
host $ cd /opt/mv_pro_5.0
6) Unpack the tar files (as root) by using the following commands:
host $ tar zxf mvltools5_0_ ####### .tar.gz
host $ tar zxf DaVinciLSP_ # _ # _ # _ # .tar.gz