Texas Instruments TMS320DM6467 DVEVM, Getting Started Manual, Page: 29 / 72

Running the Standalone Demos
Running the Demonstration Software 3-9
3.3.4 About the Decode Demo
The Decode demo plays audio/speech and video files you select. You
can select a source video file and a source audio or speech file. Use the
left and right arrow buttons to choose from the demo files and the files
created by the Encode demo, which are stored on the EVM’s hard disk
drive. The decoded signals are sent to an HD display connected to the
EVM board's component video output connectors.
The supported video algorithms are H.264 (.264 file extension) and
MPEG2 (.m2v file extension).
The supported audio algorithm is AAC (.aac file extension). The
supported speech algorithm is G.711 (.g711 file extension).
Table 3–3 IR Remote Buttons for Decode Demo
IR Remote Button Mode Action Performed
Up/Down -- -- no action --
Left/Right Setup Select a different file combination
Play or OK Setup Begin decode demo
Record -- -- no action --
Info/Select Run Toggle information display