Texas Instruments TMS320DM6467 DVEVM, Getting Started Manual, Page: 26 / 72

Running the Standalone Demos
3-6
3.3.2 About the Decode Demo
The Decode demo allows you to record and playback video.
from an HD video source connected to the EVM board's component input
connectors, is encoded, then decoded, and then sent to a display
connected to the EVM board's component video output connectors.
Note: The Decode demo inputs HD video and outputs
standard video—not HD (720p) video. Since HD displays accept
standard video input, you should not need to modify your hardware
setup to run this demo.
The Decode does only video processing; it does not encode
and decode audio or speech. The supported video algorithm is H.264
Baseline Profile (.264 file extension).
Table 3–1 IR Remote Buttons for Decode Demo
IR Remote Button Mode Action Performed
Up/Down -- -- no action --
Play or OK Setup Begin demo
Record -- -- no action --
Info/Select Run Toggle information display
Left/Right Run Change information transparency level
Pause Run Pause demo (press Play to resume)
Stop Setup / Run Return to previous screen