Texas Instruments TMS320DM6467 DVEVM, Getting Started Manual, Page: 37 / 72

Preparing to Install
DVEVM Software Setup 4-5
4.2 Preparing to Install
On a host system, mount the DVEVM demonstration DVD and copy the
following files to a temporary location with at least 2.3 GB available
space. Since you can delete the installation files after installing the
software, a directory like /tmp is recommended.
❏
mvl_5_0_#_demo_sys_setuplinux.bin (disk 1)
❏
mvl_5_0_0_demo_lsp_setuplinux_#_#_#_#.bin (disk 2)
❏
dvsdk_setuplinux_#_#_#_#.bin (disk 2)
❏
xdctools_setuplinux_#_#_#.bin (disk 2)
❏
bios_setuplinux_#_#_#_#.bin (disk 2)
❏
TI-C6x-CGT-v#.#.#.#.bin (disk 2)
❏
linux_performance_testbench_setup_#.#.#.#.bin (disk 2)
Updates to these installers may be available on the TI DaVinci Software
Updates website listed in Section 1.5.
Ensure that an X graphical display is available.
4.3 Installing the Software
Installing the software used by the DVEVM involves performing the
following steps:
❏
Section 4.3.1, Installing the Target Linux Software
❏
Section 4.3.2, Installing the DVSDK Software
❏
Section 4.3.3, Installing the Codec Servers
❏
Section 4.3.4, Installing the A/V Demo Files
❏
Section 4.3.5, Installing the SoC Analyzer
❏
Section 4.3.6, Installing the Linux Performance Test Bench
❏
Section 4.3.7, Exporting a Shared File System for Target Access
❏
Section 4.3.8, Testing the Shared File System