Texas Instruments TMS320DM6467 DVEVM, Getting Started Manual, Page: 14 / 72

Setting Up the Hardware
2-2
2.1 Setting Up the Hardware
To set up the hardware provided with the EVM, use the steps in the
sections that follow. You may skip sections if you do not need to access
a particular peripheral. For example, if you do not need to use the serial
cable, skip that section.
1) The EVM is sensitive to static discharges. Use
a grounding strap or other device to prevent
damaging the board.
Be sure to connect communication cables
before applying power to any equipment.
2) Verify that the EVM board’s EMU0/1 select switch (S1) is set
correctly. The settings shown here enable both ARM and DSP JTAG
for emulation debugging.