![background image](http://html.mh-extra.com/html/texas-instruments/ez430-chronos/ez430-chronos_user-manual_1094525024.webp)
eZ430-Chronos Demo Software
3.2.2.5
PowerPoint Mode - RF
This mode requires the eZ430-Chronos Control Center PC software.
Press # until PPt is shown (see
). This mode allows control of a PowerPoint presentation by
translating button pushes on the Chronos module into keystrokes of the PC keyboard. No acceleration or
other data is transmitted. The default settings are:
•
# : Go to presentation mode (F5)
•
* : Previous slide (Left)
•
UP : Next slide (Right)
The Control Center allows user defined key settings (including combinations) (see
).
Secondary function:
Start or stop transmission of button pushes. Pushing DOWN starts/stops the pairing
process or stops the transmission (the access point on the PC must be started from the eZ430-Chronos
Control Center (see
). The RF icon on the LCD flashes when the radio is active; if pairing
fails, the icon disappears. The top LCD line shows the time during the pairing until the data transmission is
disabled.
Set function:
None
3.2.2.6
Sync Mode - RF
This mode requires the eZ430-Chronos Control Center PC software.
Press # until "SYnC" is shown (see
). This mode allows doing a variety of settings for the wrist
module conveniently from the eZ430-Chronos Control Center PC software over the air (see
•
Time settings
•
Date settings
•
Altitude calibration
•
Temperature calibration
Secondary function:
Start or stop link for Sync Mode. Pushing DOWN starts/stops the pairing process or
stop the link (the access point on the PC must be started first from the eZ430-Chronos Control Center
(see
). The RF icon on the LCD flashes when the radio is active. If the pairing fails, it
disappears. After a successfully received message, the LCD shows "DONE". The top LCD line is off
during the pairing and until the Sync Mode is disabled.
Set function:
None
24
eZ430-Chronos Software
SLAU292F – November 2009 – Revised October 2013
Copyright © 2009–2013, Texas Instruments Incorporated