![background image](http://html.mh-extra.com/html/texas-instruments/ez430-chronos/ez430-chronos_user-manual_1094525020.webp)
eZ430-Chronos Demo Software
3.2.1 Detailed Feature Overview - Modes Using the Top LCD Line
3.2.1.1
Time Mode
Press * until the time mode is active (see
for details).
Secondary function:
Seconds. Press UP to activate the alternative display. To return to the HH:MM
mode, push the UP button again.
Set function:
Setting the time.
1. Hold * for three seconds until the time disappears and 12H or 24H is shown on the LCD.
2. Select 12H or 24H mode by pushing the UP or DOWN buttons.
3. Press # to continue with the time adjustment.
4. Set the hours by pushing the UP or DOWN button.
5. Press # to continue with the minutes adjustment.
6. Set the minutes by pushing the UP or DOWN button.
7. Press # to continue with the second adjustment.
8. Set the seconds by pushing the UP or DOWN button.
9. Press * to confirm the settings and go back to normal operation, or press # to start over with step 2.
NOTE:
If no button is pressed for more than 30 seconds, the previous settings are restored.
3.2.1.2
Alarm Mode
Press * until the alarm mode is active (see
for details). The alarm mode can be distinguished
from time mode by an alarm symbol (bell) that flashes when the alarm time is displayed.
Secondary function:
Alarm on or off. Press UP to enable or disable the alarm. The settings are
confirmed by "on" and "off" in the top LCD line. The bell icon stays on in all other modes when the alarm is
enabled and does not appear when the alarm is disabled.
Set function:
Setting the alarm time.
1. Hold * for three seconds until the alarm time hour starts to flash.
2. Set the hours by pushing the UP or DOWN button.
3. Press # to continue with the minutes adjustment.
4. Set the minutes by pushing the UP or DOWN button.
5. Press * to confirm the settings and go back to normal operation, or press # to start over with step 2.
NOTE:
If no button is pressed for more than 30 seconds, the previous settings are restored.
20
eZ430-Chronos Software
SLAU292F – November 2009 – Revised October 2013
Copyright © 2009–2013, Texas Instruments Incorporated