eZ430-Chronos Control Center PC Software
Figure 3-2. eZ430-Chronos Control Center
3.3.1
SimpliciTI™ Acc/PPT Tab (Mouse and PowerPoint Control)
The SimpliciTI Acc / PPT tab support two different features. It may be used to display the acceleration
data transmitted by the Chronos module, which can also be used to control the mouse pointer. It may also
be used to remotely control the PC with user-definable shortcuts such as PowerPoint control.
Pairing Chronos module and PC:
1. Activate the pairing on the PC by clicking Start Access Point. The control center status line displays
"Access point started. Now start watch in acc, ppt or sync mode" when the PC is ready
2. Select "ACC" or "PPt" on the eZ430-Chronos module by pushing the # button, depending on the
desired function - see detailed description in
or in
3. Initiate pairing on the Chronos module by pushing the DOWN button to activate the selected mode
After a short time, the link is established.
In "ACC" mode, the Control Center status bar shows:
"Receiving data from acceleration sensor X=... Y=... Z=...".
In PPt mode, the Control Center status bar reports which button is pushed (#, *, or UP).
27
SLAU292F – November 2009 – Revised October 2013
eZ430-Chronos Software
Copyright © 2009–2013, Texas Instruments Incorporated