manualshive.com logo in svg

Texas Instruments CC1150, Manual

The user manual for the Texas Instruments CC1150 can be downloaded for free from manualshive.com. This comprehensive manual provides detailed instructions and information about operating and optimizing the CC1150, ensuring a smooth user experience. Download the manual now to unlock the full potential of this exceptional product.

Share
Download
background image

PACKAGE OPTION ADDENDUM

www.ti.com

30-May-2018

Addendum-Page 1

PACKAGING INFORMATION

Orderable Device

Status

(1)

Package Type Package

Drawing

Pins Package

Qty

Eco Plan

(2)

Lead/Ball Finish

(6)

MSL Peak Temp

(3)

Op Temp (°C)

Device Marking

(4/5)

Samples

CC1150RGVR

ACTIVE

VQFN

RGV

16

2500

Green (RoHS

& no Sb/Br)

CU NIPDAU |

CU NIPDAUAG

Level-3-260C-168 HR

-40 to 85

CC1150

CC1150RGVT

ACTIVE

VQFN

RGV

16

250

Green (RoHS

& no Sb/Br)

CU NIPDAU |

CU NIPDAUAG

Level-3-260C-168 HR

-40 to 85

CC1150

 

(1)

 The marketing status values are defined as follows:

ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.

 

(2)

 RoHS:  TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance

do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based
flame retardants must also meet the <=1000ppm threshold requirement.

 

(3)

 MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.

 

(4)

 There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.

 

(5)

 Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation

of the previous line and the two combined represent the entire Device Marking for that device.

 

(6)

 Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish

value exceeds the maximum column width.

 

Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.

 

In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.

Summary of Contents for CC1150



































































Reviews:

No comments

Related manuals for CC1150

Xblitz X450 Manual preview
X450
Brand: Xblitz Pages: 76
Simrad 38-9 - REV B Installation Manual preview
38-9 - REV B
Brand: Simrad Pages: 52
AstroStart Elite 2625-TX Quick Start Manual preview
Elite 2625-TX
Brand: AstroStart Pages: 2
E sky PPM-FM Instruction Manual preview
PPM-FM
Brand: E sky Pages: 19
Teledyne Insta-Trans Operating Instructions Manual preview
Insta-Trans
Brand: Teledyne Pages: 40
Jung FMx5001M Series Operating Instructions Manual preview
FMx5001M Series
Brand: Jung Pages: 10
Ditel KOS1605P User Manual preview
KOS1605P
Brand: Ditel Pages: 3
Rover RLT-1550 D10 Operating Manual preview
RLT-1550 D10
Brand: Rover Pages: 27
Icom UT-112 Installation And Programming preview
UT-112
Brand: Icom Pages: 2
Alinco DJ-FX446 Instruction Manual preview
DJ-FX446
Brand: Alinco Pages: 32
GME Electrophone TX7000 SERIES Instruction Manual preview
TX7000 SERIES
Brand: GME Electrophone Pages: 28
TFA 30.3110 Manual preview
30.3110
Brand: TFA Pages: 6
Ecolink WST-802 Manual preview
WST-802
Brand: Ecolink Pages: 2
King-Gage ES2 550*-1 Series Installation And Operation Instructions Manual preview
ES2 550*-1 Series
Brand: King-Gage Pages: 8
D-Link DPN-100 Quick Installation Manual preview
DPN-100
Brand: D-Link Pages: 8
D-Link DEM-311GT - SFP Transceiver Module Specifications preview
DEM-311GT - SFP Transceiver Module
Brand: D-Link Pages: 2
Zonda ESKY005437 User Manual preview
ESKY005437
Brand: Zonda Pages: 2
MITECH TWIN WS-DM Installation And Use Manual preview
TWIN WS-DM
Brand: MITECH Pages: 4

Brands by name

Popular brands

Load more brands