Figure 10-1. Using Cell Input Pins for Interconnect Measurement
If this connection across an interconnect is not needed (or it is preferred to avoid the extra resistor and
capacitor), then unused cell input pins should be shorted to adjacent cell input pins, as shown in
VC8.
Figure 10-2. Terminating an Unused Cell Input Pin
A configuration register is used to specify which cell inputs are used for actual cells. The device uses this
information to disable cell voltage protections associated with inputs that are used to measure interconnect or
SLUSE14B – DECEMBER 2020 – REVISED DECEMBER 2021
Copyright © 2021 Texas Instruments Incorporated
35
Product Folder Links:
Summary of Contents for BQ76942
Page 84: ......
