8
• IP 7000 BR
Setup and connection
Location tips
• Select a stable, level base or a suitable wall .
• Make sure that the environment is clean and free from
dust .
• Avoid placing the unit close to sources of heat or in
direct sunlight .
• Do not place any heavy objects on the cables, the
speakers or the device .
• The device should have approx . 10 cm of clearance
on all sides to ensure adequate circulation of air .
Setting up the speakers
TV
Stereo triangle
Front
Front
Center
Surround
Surround/rear
Surround/rear
Surround
Subwoofer
(a)
(a)
(b)
(b)
Center speaker
• Place the center speaker in a central position directly
under the screen or ideally on a circular arc that is
slightly curved towards the screen . You can also mount
some speaker models directly on the wall using the
keyhole on the rear panel .
Front speakers
• The front speakers are set up or hung to the right and
left of the screen .
• The speakers should be in line with the center speaker
and form an equilateral triangle with the listener – the
so-called stereo triangle (distance from the listener =
distance between the speakers) .
• The speakers should project sound directly into the
room or slightly towards the listener .
Surround speakers
• The surround speakers are setup or hung to the side
(a) or back (b) of the listener at a height of 1 .20 m to
2 .10 m .
• There should be at least 100 cm distance to the
listener .
Subwoofer
• The location of the subwoofer can be freely selected
and does not influence the other speakers . However,
do not place it in the corner of the room as this may
result in irregular frequency overloads . A location
between the front speakers is often ideal .
Rear speakers
The IP 7000 BR emits the rear channels via the jacks
21
“RC/PRE OUT” to set up a 6 .1/7 .1 system . You can con-
nect an external stereo amplifier, active speaker or radio
system (e .g . the RearStation 4) to it . Then the speakers
are mounted behind (b) or above the viewers .
Connecting the speakers
Attention
Risk of damage!
Do not connect the unit to the mains yet!
Use the highest quality of speaker cords possible with a
cross-section of at least 1 .5 mm
2
to connect to the speak-
ers . You can order this type of cables in our webshop
(www .teufelaudio .com) in the “Accessories” area .
24
–
The connector terminals
24
“SPEAKER” for the six speak-
ers are located on the back side of the receiver:
Speaker
Label
Subwoofer
SUBWOOFER
Surround right
SURR RIGHT
Surround left
SURR LEFT
Center
CENTER
Front right
FRONT RIGHT
Front left
FRONT LEFT
