Teufel IP 7000 BR, Technical Description And Operating Instructions

Page: 15 / 32

• IP 7000 BR 15
“Load Defaults”
Here, you can reset all receiver settings to the default
settings . After the reset, you will have to reconfigure your
individual settings .
“System Information”
With this menu item, you can access the serial number
and the status of your receiver's firmware .
“BD-Live Storage”
The BD Live function creates a folder “BUDA” stick for
saving data on the USB . You can delete data here if the
memory on your stick runs out .
Information – Displays the available memory on the
inserted USB stick or displays “No USB” .
Erase BD-Live data
– Clear the memory occupied by BD
Live on the USB stick .
“DivX® VOD DRM”
You can find the DivX® VOD registration code for your
IP 7000 BD here . You can register your device with this
code in order to play DivX® videos protected by copy-
right or with copy protection . For more information, visit
the website “vod .divx .com” .
“Security” menu
This menu time contains a child lock for BD/DVD play-
back . Some BD/DVDs are labelled for certain age groups
and cannot be played back if a corresponding setting
has been configured . Unfortunately, many BD/DVDs are
not properly protected and even personally burned cop-
ies and video movies are not provided with this protec-
tion .
You will need a four-digit password to change the setting .
The default is “0 0 0 0” (the number zero four times) .
“Change Password”
• First enter the current password with the number but-
tons 33 “1 . . .0” .
• Then enter the new password twice with the number
buttons
33
“1 . . .0” .
Be sure to memorise the new password! You can reset the
receiver to the default settings in an emergency (see the
“System” menu) .
“Parental Control”
Setting the protection level . Eight levels are available,
which correspond to the recommendations of the MPAA
(Motion Picture Association of America) for rating movies .
This system only takes effect with American DVDs/BDs .
You will be asked for a password in order to open this
menu .
Off
– This turns protection off . All movies can be played
back without restrictions .
KID SAFE, Safe for kids .
G All children and general guidance .
PG
Parental guidance .
PG-13
Parents guidance for children under 13 .
PGR Parental guidance recommended .
R Restricted viewing
NC-17 No one 17 and under allowed .
ADULTS
, Adults only .
Audio
You can activate the sound system of the IP
7000 BD in this menu .
“Level”
You can increase or decrease the relative volume from
“+10 dB” to “–10 dB” for each speaker . Select the “dB”
value and change it with the navigation buttons
33
“ ▲▼ ” .
FL
– Front left
Center – Center
FR – Front right
SR
– Surround right
RR
– Rear right
RL – Rear left
SL – Surround links
Sub
– Subwoofer
(also see the special button “SPEAKER LEVEL”, page 17 .)
“Test Tone”
Volume adjustment with a test tone . As previously de-
scribed with “Level”, you can increase or decrease the
relative volume for each speaker . In the process, audio
playback will be replaced by a test tone (a noise) whose
volume can be adjusted using the volume controls 1 and
32
“/–” . The test tone mutes as soon as you
leave the sub-menu .
“Lipsync”
Digital image processing in the television set requires
some time . In order to keep the image and sound
synchronous, television sets delay the sound by a few
milliseconds . To ensure that the sound of your receiver is
also synchronous, you can configure the audio delay for
certain inputs from 0 to 200 ms here .
(also see special button “LIPSYNC”, page 17 .)
“Tone”
Here you can configure the sound within two ranges:
Bass low tones
Treble high tones
You can configure either range from “–10 dB” (lower) to
“+10 dB” (increase) .
(also see special button “TONE”, page 17 .)
“Distance”
The surround sound effect may be corrupted if the speak-
ers are positioned at different distances to the listening
position . Set the distances from the listening position to
each speaker from 0 to 400 cm in order to compensate
these run-time differences .
“Source Level”
Here you can set the relative volume from –10 dB to +10
dB for each source in order to adjust different levels of
the connected devices and of the tuner .