TESTO Saveris 2 H2, Commissioning Instructions

Page: 83 / 120

7 Maintenance
83
5 To distribute the Saveris radio data loggers already registered on the
system to stationary or mobile zones (for Saveris mobile) according to
their purpose: click on [Add stationary zone] or [Add mobile zone] .
6
Open the selection list via the button and select the zone which the
Saveris WiFi data logger should be assigned to.
All channels of a Saveris radio data logger must be assigned to the
same zone.
7 Click on [Next >] .
8
Click in the TC type field and enter the thermocouple element type ( K ,
J , T or S ) if this information is necessary for the instrument.
9 If required, change the default values in the Logger name and
Channel name fields.
Assign channel names that are not longer than 20 characters.
10
Click on
[Next >]
.

The settings for the measuring cycle
are displayed.
11 Enter Measuring cycle and define the unit for it.
The measuring cycle determines the intervals at which a new reading is
saved in the Saveris base.
Possible settings for the unit:
• sec (second)
• min (minute)
•
h
(hour).
The smallest transfer rate for Saveris radio data loggers is one minute.