TESTO Saveris 2 H2, Commissioning Instructions

Page: 57 / 120

6 Commissioning
57

The welcome dialogue for the startup
wizard is displayed.
2 Click on [Next >] .

The System status dialogue is displayed with the General tab.
3
Switch to the Integrate router tab.
The direct connection type means that the data logger is directly
registered on the Saveris base or a Saveris converter.
4
Click in the
Connection type
cell of the data logger which needs to be
assigned to a Saveris router.

The cell is shown as a selection list.
5
Use the button to open the selection list and select the Saveris router
which the data logger needs to be assigned to.
5.1 Perform steps 4 to 5 for all other data loggers with measurement data
that need to be transmitted to the Saveris base via a Saveris router.
6 Position the data logger and Saveris router at their mounting locations
to check the radio links.