6 Using the product
41
The testo 380 has 3 test types:
• the
Compliance measurement
test is for official
measurements in accordance with the 1st BImSchV
• the
Adjustment help
test is for the adjustment of combustion
processes
•
Approval test
is for individual room furnaces
> The operating status of the combustion system to be measured
must comply with the national directives.
Options
>
Operation check
: an operation check of the measurement
system can be carried out, .
>
Tightness test
: the tightness of the fresh air and gas path is
tested.
>
Particle analyzer info
: testo 380 information is displayed.
>
Probe info
: information on the particulate matter probe is
displayed.
>
Nozzle data
: select and edit nozzle calibration data.
>
Particle sensor pump: on
or
Particle sensor pump: off
: the
sensor pump is switched on or off.
>
[Options]
→
Test Bed (gradient check)
(only for test beds
and testo Service):
procedure for checking the determinant
measurement parameters for the six-monthly inspection of the
test bed with specialised equipment.
>
[Options]
→
Diagnosis (service)
:
only for Testo Service.
Measuring
1. Select compliance measurement, adjustment help or approval
test:
[
▼
]
→
[OK]
.
- System check: tightness test successfully completed?
>
[Yes]
: continue with point 2.
>
[No]
: Carry out tightness test.
2. Select solid fuel:
[
▲
]
,
[
▼
]
→
[OK]
.
