Chapter 5 – Composer Software
Page 54
TestEquity 101H Temperature/Humidity Chamber
End Action
Set what the Temperature or Humidity condition will be after the profile is complete. See
page 30 for more information. Options include:
•
User:
program will end with the same Temperature and Humidity Static Set Point values that
were entered before the profile was run.
•
Off:
the Temperature and Humidity control mode is set to Off.
NOTE:
Selecting
Off
as the End Action is not recommended. See page 30 for more
information.
•
Hold:
the Temperature and Humidity Set Point is set to the last value used in the profile.
Opening the Profile View
To view the profile listing:
1.
Click the device to view the device toolbox.
2.
Click
Profiles
to bring up the profile listing.
Creating Profiles
To create a new profile in the controller:
1.
Click the
Click to add...
button.
2.
If desired, click in the Name field and change the profile’s name.
Note:
A profile name is limited to 20 characters.
Saving a Profile to a Storage Device
To save a profile:
1.
Select the profile by clicking it in the profile list.
2.
Click the
Save
button at the bottom of the profile list.
3.
Use the Save As dialog to edit the name and select the desired location and click the
Save
button.
Hint:
Save is an option on the profile pop-up menu.
Note:
A profile that has a password applied will be saved with the password.
Loading a Profile
To load a profile previously saved on the computer in to controller memory:
1.
Click the
Load
button.
2.
Use the open dialog to locate and select the desired profile file.
3.
Click Open.
