Chapter 4 – Using the F4T Front Panel
Page 22
TestEquity 101H Temperature/Humidity Chamber
Chamber Functions (Output Widget)
Chamber functions can be turned ON/OFF using the buttons on the Output Widget. The buttons
may be named differently depending on your model chamber. The buttons can be pressed to
toggle the functions ON/OFF in Static Set Point (manual) mode or while a profile is running.
The image below shows an F4T with Power, Humidity, and Purge in the output widget.
Below is a summary of the button functions assigned by TestEquity.
Power Button
The
Power
button on the F4T Controller turns the chamber ON/OFF. There will be a green
check mark on the
Power
button when it is ON.
Humidity Button
The
Humidity
button turns the humidity system ON/OFF.
Purge Button
The
Purge
button the purge system ON/OFF.
Note:
Your chamber will have a Purge button even
if the Purge option is not installed.