AMETEK CTS
NSG 3040A, 3060A series
Operating Manual
V 1.04
2 / 157
Exclusion for Documentation
Unless specifically agreed to in writing, AMETEK Compliance Test Solutions (AMETEK CTS):
(a) Makes no warranty as to the accuracy, sufficiency or suitability of any technical or other information provided
in its manuals or other documentation.
(b) Assumes no responsibility or liability for losses, damages, cost or expenses, whether special, direct, indirect,
consequential or incidental, which might arise out of the use of such information. The use of any such
information will b
e entirely at the user’s risk, and
(c) Reminds you that if this manual is in any language other than English, although steps have been taken to
maintain the accuracy of the translation, the accuracy cannot be guaranteed. Approved AMETEK content is
contained with English language version.
The present manual shows suggestions of test setups according the standards IEC 61000-4-x using equipment
manufactured by AMETEK CTS.
The suggestions do certainly not replace the standards! Variations due to different interpretations of the standard
are possible. The circuits shown in the figures supposed to illustrate the functional principles only and do not
show every single detail of the components.
Manual information
Version / date:
1.04 / 03.03.2020
Replaces:
1.03 / 05.09.2019
Filename:
UserManual-NSG 3000A series-E-V1.04.doc
Print date:
03.03.20
Contact Information
AMETEK CTS GmbH
Sternenhofstrasse 15
4153 Reinach BL1
Switzerland
Phone: +41 61 204 41 11
Fax:
+41 61 204 41 00
URL:
Copyright © 2020 AMETEK CTS GmbH
All right reserved.
Information in earlier versions. Specifications subject to change