AMETEK CTS
NSG 3040A, 3060A series
Operating Manual
V 1.04
82 / 157
11.1.1.
Burst Menu options from test setting
The In every test mode, the user can select the following options. routines.
Change to other test modes
-
Quick Start
-
STEPS
-
User Test
-
Standard Test
Other:
-
Add to STEPS
-
Configuration
-
Save as User Test
-
Load Defaults
ADD TO STEPS
STEP tests are temporary stored tests for a user
, who don’t need these settings after switching off the device.
An actual test setting can be saved as a STEP test. Each phenomenon can save any number of sequences as
STEP tests. The STEP tests are stored until the device is switched off.
CONFIGURATION
Configuration of the trigger, monitor and standard change activate/inactive settings
SAVE AS USER TEST
The user defined library where all created Burst tests are stored.
LOAD DEFAULTS
Restore the phenomenon settings of the actual test to the defaults.
Additional Configuration in Standard Mode
Change Standard ACTIVE
All parameters are free to change, even these
which are fix defined in the standard as polarity,
phase angel, number of impulses…
Reset standards to default
Reset the changed parameters to default value.
NOTE
Menu settings for all other phenomenon are similar. These settings are no longer
specifically described.