Fire bar (5) made of solid foundry-iron is installed into the lower part of the fire chamber. Under the fire
chamber there is the ash-pit with ash-drawer (6).
During functioning of the stove, primary air, needed for combustion, is moved through ajar ash box (6) and fire
bar (5) to fuel. Fire bar renders possible to overload the combustion process and to get a powerful heat-temperature
flame at the moment of ignition. It provides equable burning of fuel wood. «Tunguska XXL 201
3
» and «Tunguska
XXL 201
3
Vitra» models have more deep fire box, cast iron shutter gate is installed full-depth of the fire chamber
providing fuel combustion even in the farthest corners.
Ash falls into ash box through holes of fire bars. The stove can be cleaned by use of ash box during functioning
of the stove.
Fumes move to flue through branch pipe with diameter 115 mm.
For model with heat exchange unit (10) the heat exchange unit is fasten inside the side wall, symmetrical holes
closed by blind plugs (3) are at the opposite wall of the fire chamber. The heat exchange unit allows to heat water in
the remote tank; and its location inside the fire chamber considerably accelerates the heating process.
Elements of the bath stove not bearing the heavy thermal load are made of structural steel.
The external surface of the stove is covered with heat-resistant organic-silicon enamel of ÊÎ-868 type.
On a stove there is an information code plate with details about a model of a stove, its mass, factory serial
number, production date of a stove and other technical features, and also the information on certificates for this
model.
A stove is packed in a transport pack. Maintenance manual in a packaging bag and components are enclosed in
the stove combustor.
On a pack of a stove at the front part there is a label with information about a model of a stove, its mass, design
features and production date.
ATTENTION! The manufacture reserves the right to introduce changes into the bath stove design not
impairing its consumer properties.
1. Cut a packing tape
2. Remove cardboard boxes
3. Remove a polyethylene
4. Pull from a stove maintenance manual and components (if available) and take off a packing
5. Take away blocks and turn off fixing bolts
6. Remove advertising stickers from a surface of a protective film.
ATTENTION! Don't use the stove for industrial premises of categories A (À), B (Á), V (Â) of fire and
explosion safety in accordance with NPB (ÍÏÁ) 105-95 (classification of premises and buildings of fire
and explosion safety).
ATTENTION! Don't use matters as fuel which aren't mentioned under point 6.
ATTENTION! Expressly prohibited using black coal and coal briquettes as fuel.
8. MARKING AND PACKING OF THE STOVE
8.1. Marking
8.2. Packing
8.3 Procedure of remove the packaging by a consumer
9. SUITABLE APPLICATION
9.1. Operational constraints
32
