Terex TS14G, Maintenance Manual

Page: 229 / 376

Section 235-0040
SM 2279 04-04
1
DESCRIPTION
Numbers in parentheses refer to Fig. 1.
The hydraulic tank is the common oil reservoir for the
steering and bowl hydraulic systems. It is mounted to
the tractor frame, at the rear of the cab and is
secured with bolts (24), washers (25), lockwashers (26)
and nuts (27).
Integral with tank assembly (1) are filter assembly (14)
with in built relief valve assembly, suction screen (17),
access covers (6 & 8) and filler neck assembly. Two sight
gauges (20) on the side of tank assembly (1) indicate
hydraulic oil level. Breather (21) is mounted off the top of
the hydraulic tank (1) via adaptor (22) and allows any air
entering the tank to be released to atmosphere, preventing
a pressure build up in the tank assembly (1).
MAINTENANCE
Numbers in parentheses refer to Fig. 1.
Note: Tighten all fasteners to standard torques listed
in Section 300-0080, STANDARD BOLT AND NUT
TORQUE SPECIFICATIONS.
WARNING
To prevent personal injury and property
damage, be sure wheel blocks, blocking
materials and lifting equipment are properly
secured and of sufficient capacity to do the
job safely.
BOWL HYDRAULIC SYSTEM - Hydraulic Tank
SM - 2100
Fig. 1 - Exploded View of Hydraulic Tank and Mounting
8 - Access Cover
9 - Bolt
10 - Bolt
11 - Lockwasher
12 - Plug
13 - Plug
14 - Filter Assembly
15 - Tie Rod
16 - Wing Nut
17 - Suction Screen
18 - Gasket
19 - Plug
20 - Sight Gauge
21 - Air Filter / Breather 22 - Adaptor
23 - Plug
24 - Bolt
25 - Washer
26 - Lockwasher
27 - Nut 1 - Tank Assembly
2 - Filler Cap
3 - Gasket
4 - Latch Assembly
5 - Gasket
6 - Access Cover
7 - Gasket
13
8
7
10
11
20
2
3
4
21
22
1
24
25
25
26
27
19
25
24
26
27
23
17
5
6
12
11
9
18
14
15
16
Courtesy of Machine.Market