Terex TS14G, Maintenance Manual

Page: 169 / 376

Section 210-0040
3
SM 2276 03-04
Cooling System - Radiator and Mounting
DISASSEMBLY
Numbers in parentheses refer to Fig. 3, unless
otherwise specified.
Note: Position radiator assembly on wooden blocks
with radiator shroud (20, Fig. 1) up to protect radiator
core during 'Disassembly'.
1. Remove bolts (8, Fig. 1), lockwashers (9, Fig. 1) and
washers (4, Fig. 1) securing radiator shroud
(20, Fig. 1) to radiator assembly (28, Fig. 1). Remove
radiator shroud from radiator assembly.
2. Remove mounting hardware, clip (7, Fig. 1) and
overflow tube (16, Fig. 1) from filler neck (17, Fig. 1) on
radiator top tank (1).
3. Remove bolts (11), Lockwashers (12) and nuts (7)
securing side columns (3 & 4) to top tank (1) and
bottom tank (2). Remove side columns (3 & 4).
4. Remove nuts (7), washers (12) and bolts (11)
securing top tank (1) to core assembly (5).
5. Remove top tank (1) from core assembly (5) and
discard gasket (6).
6. Remove bolts (19, Fig. 1) securing filler neck
(17, Fig. 1) to radiator top tank (1). Remove filler neck
(17, Fig. 1) and discard gasket (6, Fig. 1).
7. Remove nuts (7), washers (12) and bolts (11)
securing bottom tank (2) to core assembly (5).
8. Remove bottom tank (2) from core assembly (5).
Discard gasket (6).
9. If required, remove drain plug (2, Fig. 1) and studs
(22, Fig. 1) from bottom tank (2).
SM - 3155
Fig. 3 - Component Parts of Radiator Assembly
10 - Nut
11 - Bolt
12 - Lockwasher
4 - Side Column - RH
5 - Core Assembly
6 - Gasket
1 - Top Tank
2 - Bottom Tank
3 - Side Column - LH
7 - Nut
8 - Stud
9 - Damper
1
2
3
4
5
6
6
7
7
8,9,10
11,12
11,12
Courtesy of Machine.Market