Terex Genie Z-33/18, Service And Repair Manual, Page: 91 / 117

January 2020
Part No. 1268514GT Z
®
-33/18 4-19
Section 4 Fault Codes
Error Source Error Type
ID Component ID Name Cause Effect Solution
83
Telematics
Remote
Shutdown
21 Fault
Unit shut down
via remote
telematics
command
All functions
disabled
-or- drive
speed
reduced
-or- lift
speed
reduced
Contact machine owner
to have functionality
restored.
100
Platform Level
Up/Down Valve
26
VALUE TOO
LOW
Open or Shorted
Associated
Function
Disabled
*Verify no open/short
circuit across RDCON
C16-11 & B-
(V14PLU OR)
16 Shorted to B- Open or Shorted
Associated
Function
Disabled
*Verify no open/short
circuit across RDCON
C16-11 & B-
(V14PLU OR)
104
Steer Angle
Sensor
11
Shorted to
supply
5V
High Speed
Drive
disabled
*Check for 5V DC at
steer sensor (GR/WH.)
*Check for 0-5V DC
output at steer sensor
(orange.)
*Check for 0-5V DC at
right AC motor controller
(C16-30.)
*Replace steer sensor.
12
VALUE TOO
HIGH
4,5V
15
VALUE TOO
LOW
0,5V
Re-calibrate steer
sensor
Replace steer sensor
16
Sensor at
Zero
0V
17 Not calibrated
Calibration Not
Completed
139
Left Rear Drive
Controller
21 Fault
Internal fault
not mapped to
a specific Genie
fault code has
occurred
Functions
disabled or
limited per
AC motor
controller
internal fault
handling. Refer to MOTOR
CONTROLLER FAULT
CODES screen on
platform display and
MOTOR CONTROLLER
FAULT CODE CHART
in service manual.
CONTROL SYSTEM FAULT CODE CHART