Terex Genie Z-135/70, Service And Repair Manual

Page: 81 / 244

October 2018 Service and Repair Manual
Boom Components
Part No. 1268557GT Z®-135 /70 67
20 Remove the mounting fasteners that attach the
lower cable track to the primary boom lift
cylinder.
21 Remove the mounting fasteners that attach the
cable track to the primary boom.
22 Carefully remove the cable track from the
machine and lay it on a structure capable of
supporting it.
Crushing hazard. The primary
boom cable track could become
unbalanced and fall when
removed from the primary boom
if not properly supported by the
overhead crane.
Component damage hazard.
The boom cable track can be
damaged if it is twisted.
Component damage hazard.
Cables and hoses can be
damaged if they are kinked or
pinched.
How t o R epair t he Primar y Boom C abl e Tr ac k
How to Repair the Primary Boom
Cable Track
Component damage hazard.
The boom cable track can be
damaged if it is twisted.
Note: A cable track repair kit is available through
the Genie Service Parts Department.
1 Visually inspect the cable track and determine
which 4-link section needs to be replaced.
2 Support the cable track assembly above the
section to be replaced.
3 Carefully remove the snap rings and pins from
each end of the damaged section of cable
track.
4 Remove the retaining fasteners from the upper
black rollers from the 4-link section of cable
track to be replaced. Remove the rollers.
5 Lift up the hoses and cables and carefully
remove the damaged 4-link section of cable
track.
Component damage hazard.
Cables and hoses can be
damaged if they are kinked or
pinched.