Terex Genie Z-135/70, Service And Repair Manual

Page: 20 / 244

Service and Repair Manual October 2018
Specifications
6 Z®-135 /70 Part No. 1268557GT
Brakes
Brake relief pressure 190 psi
13 bar
Drive Motors
(before serial number 180)
(see note below)
Displacement per revolution, high
speed 0.8 cu in
13.3 cc
Displacement per revolution, low
speed (square end) 2.7 cu in
45 cc
Displacement per revolution, low
speed (circle end) 1.5 cu in
25 cc
Drive Motors
(after serial number 179)
Displacement per revolution, high
speed 0.8 cu in
13.3 cc
Displacement per revolution, low
speed (square end) 2.7 cu in
45 cc
Displacement per revolution, low
speed (circle end) 1.5 cu in
25 cc
Note: Serial number 102 is equipped with drive
motors equal to those used on machines after serial
number 179.
Manifold Component Specifications
Plug torque
SAE No. 2 36 in-lbs / 4 Nm
SAE No. 4 10 ft-lbs / 13 Nm
SAE No. 6 14 ft-lbs / 19 Nm
SAE No. 8 38 ft-lbs / 51 Nm
SAE No. 10 41 ft-lbs / 55 Nm
SAE No. 12 56 ft-lbs / 76 Nm
Valve coil resistance specifications
Proportional solenoid valve
(schematic items N, P, R, T, V) 3.5 to
5.5Ω
Solenoid valve, 3 position 4 way
(schematic item B) 4 t
o 6Ω
Solenoid valve, 3 position 4 way
(schematic items BN, BO, BP, BQ) 7 t
o 9Ω
Solenoid valve, 3 position 4 way
(schematic item AH) 8 t
o 10Ω
Proportional solenoid valve, 3 position 4 way
(schematic items Y, AI) 8 t
o 10Ω
Solenoid Valve, 2 position 3 way
(schematic items F and AD) 5.5 to
7.5Ω
Solenoid Valve, 2 position 3 way
(schematic items AE, AF) 8 t
o 10Ω
Solenoid valve, 2 position 2 way
(schematic items H, J) 3.5 to
5.5Ω
Solenoid Valve, 2 position 3 way
(schematic items C, D, G, I, K, AX, AY, BU, BT) 7.5 to
9.5Ω
Solenoid valve, 2 position 2 way
(schematic item A) 3.5 to
5.5Ω
Continuous improvement of our products is a
Genie policy. Product specifications are
subject to change without notice or obligation.