Service and Repair Manual
March 2021
Scissor Components
90
GS
™
-30 • 32 • 46 • 47
Part No. 1272217GT
81 Remove the fasteners from the entry ladder
and remove the entry ladder from the
machine.
Crushing hazard. The entry
ladder will fall if not properly
supported and secured to the
lifting device.
82 Attach a lifting strap from an overhead crane
to the number 1 outer arm (index #22). Do not
apply any lifting pressure.
83 Remove the external snap rings and retaining
fasteners from the number 1 center pivot pins
(index #11).
84 Remove the number 1 cable bridge from the
machine.
85 Use a soft metal drift to remove the number
1 center pivot pins (index #9).
Bodily injury hazard. The
number 1 outer arm may
become unbalanced and fall if
not properly supported when the
pin is removed.
86 Slide the number 1 outer arm (index #22) to
the non-steer end and remove it from the
machine.
Bodily injury hazard. The
number 1 outer arm may
become unbalanced and fall if
not properly supported when
removed from the machine.
87 Attach the strap from an overhead crane to
the number 1 inner arm (index #10). Do not lift
it.
88 Remove the upper fasteners securing the
number 1 inner arm pivot bracket to the end
of the chassis. Loosen the lower fasteners.
89 Remove the number 1 inner arm (index #10)
from the machine.
Bodily injury hazard. The
number 1 inner arm may
become unbalanced and fall if
not properly supported when
removed from the machine.
Component damage hazard. Be
sure not to damage the limit
switch or level sensor
components when the number
1 inner arm is removed from the
machine.
