Chapter 11 - Using System Tools
Specifying Optional Settings
Terason t3000 / Echo Ultrasound System User Guide
250
Scanning in Non-Simultaneous or Simultaneous Mode
With PWD and Triplex modes, you can choose whether to scan in non-simultaneous
mode. When you are scanning in non-simultaneous mode either the 2D or the time series
window receives data. This lets you independently change the PW and Color Doppler
PRFs.When scanning in simultaneous mode, both the 2D and the time series window
receive data. This feature lets you define which method is used, based on the exam type.
Starting the System with TeraVision Off
Terason ultrasound systems that have the optional TeraVision image-enhancement
package normally start TeraVision when the system starts. To change this default so that
clicking the I.P. Filter button on the IQ tab is required for TeraVision to run, go to
Tools
>
Options
>
Display Mode
, and uncheck the box next to
TeraVision ON by Default
, then click
Apply
.
Setting Measurement Defaults
The measurement defaults include the system used to make obstetrical calculations, and
the COM port used to export obstetrical measurements to another computer.
Options: Measurements Tab
The Terason Ultrasound System uses the Hadlock measurement setup as the system
default to make obstetrical calculations. If needed, you can use a different measurement
setup. Not all measurement setups provide the full list of measurements included with the
Hadlock setup. If you choose a different setup, you can also choose to use the default setup
for measurements not included in the one you selected.
See
Working with Measurements on an Obstetrical Exam
on page 158 for more
information.
