TR5-F40W
User
Manual
47
June 20, 2018
according to users’ desired frequency in Verilog which facilitates users’ implementation as no
additional control code is required to configure the programmable oscillator.
Note:
If users need to dynamically change the frequency, they would need to modify the generated
control code themselves.
Figure 3-5 External Programmable Oscillators
Project Setting Management
The System Builder also provides functions to restore default setting, loading a setting, and saving
users’ board configuration file shown in
. Users can save the current board configuration
information into a .cfg file and load it to the System Builder.
