TCW242-S_R1.0 – July 2021
Page 18
8.2.6.
System
On this page, some general system parameters can be set up.
System name, system location, and system contact are used for device identification. They are
presented in SNMP three and XML/JSON status files.
WEB access authentication by default is active with admin/admin details.
HTTP port for WEB access by default is 80 but it can be changed. This is useful for some routers
which don’t support different outside/inside ports for port forwarding.
HTTP API access authentication by default is active. Authentication details are the same as WEB
access. The controller support two types of authentication – see the explanation for HTTP API
below.
The refresh interval can be set between 0 and 253 seconds. Zero means no automatic refresh.
Alarms colors are fixed and are presented here just for information.
Summary of Contents for TCW242-S
Page 1: ......
Page 52: ...TCW242 S_R1 0 July 2021 Page 52 Appendix A Fig 1 Fig 2...
