TCW242-S_R1.0 – July 2021
Page 50
The factory default settings are:
Username
admin
Password
admin
IP Address
192.168.1.2
Subnet Mask
255.255.255.0
Default Gateway
192.168.1.1
SNMPConfiguration
disabled
readCommunity
public
writeCommunity
private
Analog inputs unit
voltage
Analog inputs multiplier
1.000
Analog inputs ofset
0.000
Analog inputs mode
Voltage
Digital inputs mode
Open/Closed
12.
Environment information
This equipment is intended for use in a Pollution Degree 2 environment, at altitudes up to 2000
meters.
When the controller is a part of a system, the other elements of the system shall comply with the EMC
requirements and shall be intended for use in the same ambient conditions.
13.
Safety
This device must not be used for medical, life-saving purposes or for any purpose where its failure could
cause serious injury or the loss of life.
To reduce the risk of fire, only flexible stranded wire, with cross-section 0.5mm² or larger for wiring of
digital and analog inputs and relay output of the device should be used.
To avoid electric shock and fire hazards, do not expose this product to liquids, rain, or moisture. Objects
filled with liquids, such as vases, should not be placed on this device.
There is a risk of overheating (damage) of the controller if recommended free spaces to adjacent devices
are not ensured. The joint part with the external component shall have space for attachment/removal of
the cable after installation.
Summary of Contents for TCW242-S
Page 1: ......
Page 52: ...TCW242 S_R1 0 July 2021 Page 52 Appendix A Fig 1 Fig 2...
