Marquee™ Point-to-MultiPoint Series User Guide
Figure 2.3 – Marquee P-MP FP Orientation
(a) For Vertical Polarization
(b) For Horizontal Polarization
Circular
Tab
(A)
(A)
Polarization
Arrow
Polarization
Arrow
1. Fit the pole mounting bracket (A) to the two studs protruding from the back of the Marquee P-MP FP
unit according to the desired polarization, as shown in Figures 2.3a and b. Position the bracket so that
the side that has the circular tab is pointing towards the center of the unit. Secure to the unit by
threading two nuts and tighten them firmly with an appropriate wrench.
2. Attach the pivot adaptor bracket (B) to the pole mounting bracket (A) by using bolt and nut, as shown
in Fig 2.4. Tighten hardware (one place).
IMPORTANT:
Ensure that convex edge of the pivot adaptor
bracket (B) is facing concave edge of the pole mounting bracket (A).
Figure 2.4 –Assembly of Pivot Adaptor Bracket (B) to Pole Mounting Bracket (A)
(B)
(A)
Version 1.3(a)
Page 5
Jul 2005
