manualshive.com logo in svg

TERABEAM Marquee P-MP Series, User Manual

Share
Download
TERABEAM Marquee P-MP Series User Manual Download Page 4

 

 

Marquee™ Point-to-MultiPoint Series User Guide 

Section 1    
Overview 

1.1 Description 

The Marquee™ Point-to-MultiPoint (P-MP) Series is a powerful answer for customers seeking a reliable 
high-speed wireless connectivity solution. It provides the best features and wireless reach in the field by 
combining industry leading outdoor Point-to-MultiPoint optimized software with its patented amplifier 
technology. Unlike other single band products, Marquee gives you the choice of installing a license-free 
5.8 GHz, or a licensed 4.9 GHz network. If your needs change in the future, Marquee can change with 
you. 
 
The Marquee P-MP Series features the award-winning industry standard TurboCell

®

 software, a protocol 

which significantly enhances the performance of outdoor 802.11 systems through the use of adaptive 
dynamic polling, bandwidth allocation at the client, and packet aggregation. TurboCell

®

 solves the “hidden 

node” problem inherent in adding nodes to traditional 802.11 outdoor networks.

1

 

 
Marquee P-MP Series is comprised of Marquee Base units and Marquee Client / Customer Premise 
Equipment (CPE) units, also called Remote or Satellite units. The Marquee Base and Satellites are 
available in two types of enclosures: a flat panel (FP) and a ruggedized (EX) enclosure (see Figures 1.1a 
and b). The FP enclosure features an integrated antenna. The EX enclosure comes either with a flat 
panel antenna attached to the top of the unit, or it has an N-type connector on the rear to plug an external 
antenna. 
 
Refer to Appendix A for Marquee P-MP technical specifications. 

1.2 

Marquee P-MP Kit Contents 

Each Marquee P-MP kit includes the following (refer to Figures 1.1a and b): 
 

•

 

Outdoor radio with mounting hardware 

•

 

Surge protected Cat 5 DC Power Injector 

•

 

110/240 VAC to 48 VDC power supply 

•

 

CD-ROM with Windows-based Configurator software 

•

 User’s 

Manual 

 
A Terabeam outdoor Ethernet cable must be ordered separately per unit. Available lengths are 50, 100, 
200, or 300 feet. Models with external antennas include one 6 ft LMR-600 coax cable per unit. 
 

                                                      

1  Marquee 1.0 P-MP units operating with TurboCell

®

 do not support traditional 802.11 Base station or Client access. 

Version 1.3(a) 

Page 1 

Jul 2005 

Summary of Contents for Marquee P-MP Series































Reviews:

No comments

Brands by name

Popular brands

Load more brands