Marquee™ Point-to-MultiPoint Series User Guide
Figure 3.3 – Setup Screen
Figure 3.4 – Interface Setup Screen
8. Click on the setup button corresponding to the active wireless card (in this case
Setup 2
). The
IEEE
802.11 Setup
screen appears. Notice that this screen is slightly different depending on whether you
are configuring a 5.8 GHz radio (Figure 3.5a) or a 4.9 GHz radio (Figure 3.5b).
Figure 3.5a – IEEE 802.11 Interface Setup Screen Figure 3.5b – IEEE 802.11 Interface Setup Screen
for 5.8 GHz Radios
for 4.9 GHz Radios
Mode Selection –
In a P-MP configuration one unit must be Base and all the others must be
Satellite.
TurboCell Base Station Mode –
For the unit that is set up as Base, select
Polling Base Station
.
This mode is ideal for any TurboCell application, P-P or P-MP. For the unit that is set up as Satellite,
these buttons are grayed out.
Radio Configuration –
Select
802.11a
for a 5.8 GHz radio. Select
Public Safety
for a 4.9 GHz
radio.
Version 1.3(a)
Page 17
Jul 2005
