Marquee™ Point-to-MultiPoint Series User Guide
Figure 2.14 – Select a Remote Link Partner Screen
Remote Marquee
Figure 2.15 – Remote Link Test Screen
Maximize these levels
5. Using the Azimuth adjustment bolts (see Figure 2.16a or b), adjust the azimuth until the SNR readings
for both ends of the link peak. Start with azimuth adjustment on the far end of the link first (if
applicable). It is recommended that, in order to ensure the true maximum, you should adjust through
the maximum SNR reading until the reading clearly drops and continues to drop to lower level side-
lobes. Adjust back until the maximum is attained again. Then repeat for the near end of the link.
6. Using the Elevation adjustment bolt (see Figure 2.16a or b), adjust the elevation until the SNR
readings for both ends of the link peak. Start with elevation adjustment on the far end of the link first (if
applicable). It is recommended that, in order to ensure the true maximum, you should adjust through
the maximum SNR reading until the reading clearly drops and continues to drop to lower level side-
lobes. Adjust back until the maximum is again attained. Then repeat for the near end of the link.
Version 1.3(a)
Page 12
Jul 2005
