tenso-comfort BPM105, User Manual

Page: 20 / 33

Step 7:
After the measuring operation is complete,
the installed valve opens automatically to
quickly let the air out of the cuff.
The end of measurement is signalised by
a short beep and the measured systolic and
diastolic blood pressures, the pulse, and
the date and time of the measurement now
appear on the display.
The data is stored in the measured value
memory of the user. Step 8:
Press the On/Off button to switch off the
device.
Note:
The device switches off automatically
2 minutes after the end of the measurement.
Hypertension warning
If the result of your blood pressure measure-
ment has a systolic blood pressure value
higher than 139 mmHg and/or has a diastolic
value higher than 89 mmHg, the warning
symbol “high” appears to the right next to
the diastolic blood pressure value.
4.3 Use by multiple persons
When the blood pressure meter is shared by
several persons, the measured value memory
can be congured so that the measured
blood pressure measurements can be allo-
cated to up to 8 different users based on the
user identity number (1 to 8). In this case,
the measured value memory for the indi-
vidual user identity numbers is to be enabled
according to the procedure in Section 3.5
“Conguring the measured value memory”.
To make sure that the measured values are
allocated to the correct measured value
memory, the user is prompted after switching
off the device and before starting the measur-
ing operation to conrm the displayed user
identity number or to select the correct user
identity number (see Section 4.2 “Carrying
out the blood pressure measurement”,
steps 3 to 5).
C
ar
ry
in
g
o
ut
t
he
b
lo
o
d
pr
es
su
re
m
ea
su
re
m
en
t
4
WARNING:
28 29
If the measurements do not change, consult
your physician immediately!
no later than
According to the World Health Organization
(WHO), normal values for blood pressure are
140 mmHg for the systolic pressure and
90 mgHg for the diastolic pressure.
These thresholds may not be directly applicable
to any specific patient.
Please repeat the measurement to confirm
the result.