6 Checking and taking care
of the blood pressure meter
Remark:
When the MEM button continues to be
pressed, rst the average value of the last
21 days is shown, and then that of the last
28 days.
Afterwards, all stored individual values can
be looked at, from the second-to-last stored
one to the oldest available measurement.
Note:
Press the MEM button and hold to quickly
scroll through the results.
Step
To exit memory mode, switch the device off
again with the On/Off button.
6.1 Function control of the display
Every time you turn on the blood pressure
meter, all display elements appear for about
2 seconds.
all display elements are working properly,
since a faulty display can lead to false inter-
pretations of the measured values.
6.2 Cleaning the device
If needed, clean the outside of the switched-
off device with a soft, clean cloth, if neces-
sary with a mild cleaning solution. Stains
on the cuff can be carefully removed with
a moist cloth and soapsuds.
Do not wash!
Never submerge the measuring device in
Do not clean the device with gasoline, paint
thinner or other solvents.
6.3 Maintenance and storage
The blood pressure meter does
not contain any parts which require regular
maintenance.
It is recommended to have the device checked
Proper calibration is necessary when
the device has been opened (exception: bat-
C
he
ck
in
g
an
d
ca
re
6
Caution:
32
33
Once the end of the measured value memory
has been reached, or if there are no other
measured values available, the following is
displayed:
tery exchange).
Please contact Biocomfort for this purpose..
8
:
Step 7:
After pressing the MEM button again, the
average value of the measurements of the
last 14 days is displayed.
Here, the number 14 is displayed to the left
of the word "day":
This gives you the oppurtunity to determine whether
water or any liquid.
every two years for proper functioning and
continued accuracy.
