5 Measured value memory
5.1 Storing the measured values
For every user identity number (1 to 8),
the blood pressure meter automatically
stores the last 110 measured blood pressure
measurements together with the date and
time of the measurement.
If the memory is full, the oldest result is
overwritten by the result of the next measure-
ment.
The measured values are retained in the
measured value memory even when the
batteries are removed.
5.2
For every user identity number, the stored
blood pressure and pulse measurements can
be called up from the last to the oldest stored
measurement.
Furthermore, the average blood pressure
values for 7, 14, 21 and 28 days can be dis-
played.
To display the memory contents, proceed as
follows:
Step 1:
In order to access the measured value mem-
ory, press the MEM button to switch on the
device.
Step 2:
The user identity number blinks on the dis-
play, in the measured value memory of which
the result of the last blood pressure measure-
ment was stored.
Step 3:
In order to look at the contents of the meas-
ured value memory of a certain user, press
the MEM button until the desired user iden-
tity number appears.
Step 4:
Conrm the selection by pressing the On/Off
button.
Step 5:
The last stored measurement for the selected
user appears on the display with date and
time. The date and time are shown alternately
on the bottom line, each for 2 seconds.
word “day”. To the left next to the abbre-
viation “avg” (average), the number of
measurements appears which were taken
into account in the calculation of the aver-
age value.
M
ea
su
re
d
va
lu
e
m
em
o
ry
5
30
31
Step 6:
If you now press the MEM button again,
the average value calculated by the device
for the last 7 days appears.
Here, the number of days selected for the
average value is shown to the left of the
Recalling the stored measured values
23.12. = 23rd of December
10:28 = 10:28 a.m.
