The onfiguration of the wireless interface can
be found after the measured value memory
configuration in the settings menu sequence.
Step 1:
To reset the wireless interface, press the
SET button until the radio symbol (= fat
black dot in double parentheses) appears
in the bottom left-hand corner of the dis-
play.
To the right of the radio symbol appear
two “0”s.
– If there is a dash between the two “0”s,
this means that the wireless connection
is being maintained.
– If there is no dash between the two “0”s,
this means that the wireless connection
is reset.
Step 1:
In order to clear the stored blood pressure
values from the measured value memory,
press the SET button until the word “mem”
starts blinking on the right side of the display.
Step 2:
To switch between maintaining and resetting
the wireless connection, press the MEM but-
ton.
Step 3:
If you do not wish to make any further set-
tings, exit the settings menu by pressing the
On/Off button. Otherwise, continue with the
settings by pressing the SET button.
3.7 Clearing the measured value memory
The operation for clearing the measured val-
ue memory can be found after the configura-
tion of the wireless interface in the settings
menu sequence.
G
et
tin
g s
ta
rt
ed
3
22
23