How to Install the Device?
How to Change the Current Transformer Value?
19
Enter the CT Ratio
0150
/5A
OK
TURN BACK
-01.50
-01.50
-01.50
Step Measurement
Step Test Was Started
1. Step (kVAr)
L1
L2
L3
CANCEL
OK
To access the device setup page, enter the following
menus, respectively;
After reaching the device setup page, press the up or down
buttons to enter the current transformer value. When the
"Confirm" button is pressed, the device automatically starts
the current transformer test. If there is any trouble in the
connections after the current transformer test is finished,
the device will give a warning and will not accept the
connection. After correcting the connection errors according
to the warning, you can start the device installation again.
If there is no problem with the connections, the device will
automatically start to measure the Step after the current
transformer test is confirmed. After the device has measured
all the steps, pressing the "Confirm" button saves all
measured steps and the device starts to intervene.
When the "Cancel" button is pressed, it will cancel and
returns to the "Auto
matic
measurement" screen without
saving the step measurements.
To reach the current transformer value change page, enter the following commands
respectively;
After reaching the Change current transformer page (Figure 1), press the up and down
buttons to enter the current transformer value. When the "Confirm" button is pressed, the
device automatically starts the current transformer test (figure 2) if there is any trouble in
the connections after the current transformer test is finished, the device will show the
warning and will not accept the connection. After correcting the connection errors according
to the warning, you can start the current transformer test again.
If there is no problem with the connections, the device will automatically start to measure
the Step after the current transformer test is confirmed (figure 3). After the device has
measured all the steps, pressing the "Confirm" button saves all measured steps and the
device starts to intervene.
When the "Cancel" button is pressed, it will cancel and returns to the
"Auto
matic
measurement" screen without saving the step measurements.
Cancel
CT Test
Confirm
CT Connection
Current
380.0
380.0
380.0
CT Test was Started
Current Transformer Test
L1
L2
L3
A
A
A
Device Settings
E
Device Setup
E
Ayarlar
E
Settings
E
Current Transformer
E
Change Current Transformer Ratio
E
Summary of Contents for RGT-MT18
Page 1: ...RGT MT18 USER GUIDE www tense com tr...
Page 35: ...User Notes 31...
