Tense RGT-MT18, User Manual

Page: 19 / 36

3.10.4 PFC Setting
In this page PFC(compensation) and TCR(SVC) are made
active or passive ,from the Step Counter part,the setting of
the device on how many steps can be included is done. The
device can disable PFC (compensation) in necessary (like
manuel usage) situations. When the PFC is passive,
the device gives up intervening to the system. In this situation,
the device only makes measurement.
OK
Choose the PFC Mode!
Step Counter
01
TURN BACK
PFC Active
TCR Passive
3.10.5 Step Test
In this page step test is made manually. Control of the
step's output(like connection etc.) can be done. Chosen
steps are made active and the steps are on.
When the ''Return'' button is pressed, ''step setting'' page
comes to the screen; when the Setting button is pressed
''setting page comes.
SETTINGS
Select the Steps to Test!
1
14 13 12
7 6 5
18
11
4
17
10
3
16
9
2
8
15 TCR
TURN BACK
15
3.11 Device Settings
3.11.1 Device Setup : Current Transformer Test and Automatic Step Measurement Operation
3.11.2 Language Options :
Language s ettings of the device are changed.
3.11.3 Delete the Recordings : Data which are taken automatically by the device are deleted.
Back Setting Page : Returns to the settings page
3.11.4 Factory Settings :
Factory or Menu settings, assumed values are returned.
3.11.5 Password Page: Password protection is assigned to the device.
Device Settings Page
Factory Settings Password Page
TR
ENG
Language Options Delete Records? Device Setup
Back
Settings Page
When the Device Setting button is pressed,
Device Setting page comes to the dynamic
screen. You can pass Device Setup, Language
Choice, Deleting the Recordings, Factory
Settings, Password Menu and Settings from
this page.
Settings E Step Settings E
Ayarlar
E
Settings E Step Settings E
When the TCR(SVC) is deactivated , the device starts to make compensation as normal
reactive relay. Intervention can not be done with shunt reactor driver.
When the ''cancel'' button is pressed, measurement of the step is canceled and
measured values returns to the automatic step measurement screen without recording.