Tense RGT-MT18, User Manual

Page: 20 / 36

3.11.1 Device Setup
In order to set the device press the ''up'' and ''down'' buttons, enter the current
transformer value. When you press ''confirm'' button the device starts current transformer
test automatically; after completing the test if any matter is available; the device gives
warning with connections.
If there is no matter in the connections, after completing the current transformer test;
the device start the step measurement automatically. When the device measured all of the
steps, if the ''confirm'' button is pressed, all of the steps are recorded. When the ''cancel''
button is pressed; the device cancels the step measurements and returns to ''Automatic
Measurement'' screen without recording the step measurements. After completing the step
measurement; the device starts to compensation according to the recorded values.
Enter the CT Ratio
0150
/5A
OK TURN BACK
-01.50
-01.50
-01.50
Step Measurement
Step Test Was Started
1. Step (kVAr)
L1
L2
L3
CANCEL OK
3.11.2 Language Options
In this menu, The language settings of the device are
changed as Turkish or English. When you click to the
language you desired, the language of the device changes
and turns to device setup page.
When the ''Back'' button is pressed, ''Device Setup'' page
comes to the screen.
Language Selection
Back
Settings Page ENGLISH TÜRKÇE
16
Cancel
CT Test
Confirm
CT Connection
Current
380.0
380.0
380.0
CT Test was Started
Current Transformer Test
L1
L2
L3 A
A
A
3.11.3 Password Settings
Password Menu
Enter New Password!
2580
Password Control Passive
1
4
7 2
5
8 3
6
9
0
Del
OK
Cancel
In this page control of the password becomes active, the
device can be protected against the unauthorized intervention.
After the control of the password is made active ;entered
password value is recorded. the password consist of 4 letters.
You can enter the password pressing the numbers. W hen the
password is entered, press ''confirm'' button to record
password. When you quit from the setting men u ; the device
is protected anymore.
When the ''Return'' button is pressed, it turns to the ''Setting'' page without doing
operation.
Settings E Step Settings E
Settings E Step Settings E
Settings E Step Settings E