25. SPECIFICATIONS
TENS & EMS:
Output:
99 mA zero to peak
Constant current 500-1500 Ohm,
Constant voltage > 1500 Ohm
Max Pulse Energy
Total output limited to 25uC per pulse
Channels
Dual Channel
Waveform
Asymmetrical rectangular bi-phasic
TENS
2-150 Hz in steps of 1, 50-250 μS in steps of 10
Modes
Burst/Continuous
EMS
10-120 Hz, 50-400μS in steps of 10
Ramp Up/Down Time
0-8s, in steps of 1s
Work Time
1-30s, in steps of 1s
Rest Time
1-60s, in steps of 1s
Modes:
Synchronous (S) Alternating (A)
IFT:
Intensity
60 steps, 0-60mA peak to peak at 500 Ohm load
Carrier Frequency
4000Hz fixed(CH1)
Modulating Frequency
4004-4160Hz, in steps of 4Hz(CH2)
Pulse Width
125μs
Mode
4 pole
Waveform
Symmetrical balanced sine wave
Treatment Timer
Continuous, 1-90 mins
MICROCURRENT:
Frequency
0.5Hz 1Hz 1.5Hz 2Hz 3Hz 4Hz 5Hz to 50Hz
Pulse Width
10-999 mS
Waveforms
A continuous, B square unipolar, C sawtooth unipolar
Treatment Time
20 mins default
Intensity
0-700uA in 10uA steps
53
GENERAL
Output Plugs
Fully shielded: touch proof
Dimensions
61×123×22mm (exclude belt clip)
Weight
160g (with battery)
Power Supply
BL-6F Li-Ion battery 3.7V 1100mAh
Mains adaptor (Class II, IEC60601-1) with charging cradle
Input 100-240V
Output DC 5V 1000mA
Safety Classification
Type BF Designed for continuous use
IP22
Environmental
Operating Specifications Humidity: 20 to 93% RH
Temperature range: 0 to 40C
Atmospheric Pressure: 700hPa to 1060hPa
Storage and
Humidity: 10 to 93% RH
Transport Specifications Temperature range: -20 to 70C
Atmospheric Pressure: 700hPa to 1060hPa
Typical Operation Time No less than 1 week (@50%AMP, 4 hours per day, in
TENS/EMS/MIC Mode)
No less than 1 hour (@50%AMP, in IFC Mode)
Expected Service Life
No less than 5 years
54
flexistim instructions final.indd 56-57
27/11/2014 12:07