Menu steps:
FREQUENCY (Hz)
PULSE WIDTH mS (milliseconds)
WAVEFORM - SQUARE/SAW/DC
Treatment Timer (min)
Press
+/-
to adjust the setting.
13. LOCK AND UNLOCK YOUR OWN PROGRAMME
To lock a programme, first adjust the intensity to zero, then press & hold the LOCK key for
3 seconds. When you turn on the device again, this programme will load automatically. 3
seconds is a long time, but you will want to avoid accidental activation of this key.
To unlock the programme, reduce the intensity to zero, then press and hold LOCK key
for 2 seconds.
14. MEMORY MODE
Once you set intensity >5 in TENS and EMS and >0 in IF and Micro, the Usage Timer
automatically and accumulatively counts your total usage up to 999 hours 59 minutes.
There is a memory for each MODE.
To enter MEMORY and view the Usage Timer, set intensity to zero, select the MODE,
then press & hold the
PROG
and
CH1
▼ keys for 3 seconds.
The number at bottom left shows the number HOURS,
and at bottom right the number of MINUTES.
The number at the top left shows
the numbers of uses.
Press the same keys to return back to the
previous normal display.
To reset the Usage Timer to zero, press the
CH2
▼ key and
PROG
key together for 3 seconds.
12.3 IFT
Press
MODE
button until IFT is selected.
P1 appears
Press
PROG
to Select P4 MANUAL
Press
MENU +
: Hz flashes,
Menu steps:
FREQUENCY (Hz)
Treatment Timer (min)
Press
+/-
to adjust the setting
Press
MENU +/-
to save and advance to next Parameter.
Adjust intensity above zero to start the programme.
In IFT MODE both channels are linked and there is only one intensity adjustment. You
can adjust a desired intensity by pressing either of the intensity controls.
For your safety, when intensity reaches 40mA, the warning triangle flashes and
intensity cannot be increased.
Check electrode pad position. If you are certain that the pads are positioned safely, press
the SKIP
key to override. The triangle will stop flashing and intensity can be increased
to 60mA.
12.4 MICROCURRENT
Press
MODE
button until MICRO is selected.
P1 appears
Press
PROG
to Select P3 MANUAL
Press
MENU +
: Hz flashes
27
28
Uses
Hours
Minutes
flexistim instructions final.indd 30-31
27/11/2014 12:07