Tennant 5300T, Service Manual

Page: 35 / 98

SCRUBBING
5300T MM382 (10–94)
3Ć13
5. Press down on the brush lock pin.
6. Turn the brush clockwise. The brush will
drop off the brush drive hub.
7. Pull the brush out from under the scrub
head.
8. Place the scrub brush on the floor in front of
the scrub head. Make sure one of the brush
drive pins is facing front. Push the brush
under the scrub head.
9. Make sure one of the drive pin slots can be
seen through the access opening.
10. Line up the brush drive pin on the brush,
with the drive pin slot on the drive plate.
11. Lift the scrub brush from underneath onto
the brush drive hub. Turn the brush
counter-clockwise to engage the drive pins
into the drive slots.
12. Check the brush to make sure it is securely
mounted on the brush drive hub.
13. Close the scrub head access cover.
09526
09527
09528
09525