Snappi System User Manual
Document No: 053-05 v19
Page 55 of 66
March 2013
Snappi System User Manual.doc
Fig 6.11.3
Identify the slots that line up with the
harnessing and supports for your pushchair,
and slit the material in between the 2 lines
of stitching with a sharp Stanley knife (see
dotted line, Fig 6.11.3).
Important: take care only to cut the
material in the middle of the slot. Do not cut
any material outside this area. Any damage
caused to the foot muff during cutting will
not be covered by the warrantee.
Fig 6.11.4: A ‘Mini Mouse’ foot muff fitted to
the pushchair.
Notes:
•
Cleaning your foot muff: Wash the
foot muff on its own (do not include
any other items) on a 30 degree
wash with at least 1 colour catcher (2
preferable). This will prevent the risk
of colours running.
•
The foot muff is not waterproof, and
must not get wet through exposure to
rain as this may cause colours to run.
If it is raining, either remove the foot
muff or use in conjunction with a rain
cover.
•
Allow the foot muff to dry naturally,
do not iron or tumble dry.
•
Do not dry clean or bleach the foot
muff.
Fig 6.11.4
•
The foot muff must be removed before folding the pushchair
