Snappi System User Manual
Document No: 053-05 v19
Page 17 of 66
March 2013
Snappi System User Manual.doc
4.4 Using the Tilt in Space facility
Fig 4.4.1
To operate the tilt in space mechanism,
place your hand over the push handle
adjustor, and lift the lever ‘L’ (see Fig 4.4.1)
as shown.
This will open the gas strut and tilt the seat.
Note; The speed of tilt can be controlled by
varying the pressure applied at lever L.
Use your other hand to support seat as it
tilts.
Fig 4.4.2
Fig 4.4.3
To reset the tilt mechanism, hold down lever
L and push down firmly on the front of the
seat as shown (see Fig 4.4.3). Once in the
desired position, release lever L. For a 90-
degree position, move the seat so the gas
strut is fully closed and it will not move any
further before releasing the tilt lever.
IMPORTANT:
Always ensure any harness provided for the child is used and correctly adjusted before
reclining or returning the seat to a more upright position.
Always support the seat when tilting, as the gas springs can be quick to operate. If the seat is
not supported, is may move swiftly and could cause the occupant distress.
