Snappi System User Manual
Document No: 053-05 v19
Page 24 of 66
March 2013
Snappi System User Manual.doc
The lateral trunk supports are supplied
with two M8 coach bolts, and two 30mm
hand wheels per bracket (see Figs
5.1.4.1and 5.1.4.2).
To fit the laterals:
The laterals are fitted by securing with
coach bolts and hand wheels, through the
mounting slots ‘H’ (see Fig 5.1.4.3) on the
back of the seat unit.
Fig 5.1.4.3
Fig 5.1.4.4
The lateral bracket must be fed through the slot in
the cover (see Fig 5.1.4.4).
Next, insert the 2 coach bolts through the bracket
and seat back plate, so that the square neck is
sitting fully in the slots.
Finally, secure the laterals by screwing the
provided hand wheels onto the protruding
threads of the coach bolts (see Fig
5.1.4.5).
The position of the laterals can be
adjusted laterally by loosening the hand
wheels and sliding them in or out to the
required width.
They can be adjusted vertically by sliding
up and down the mounting slots ‘H’(see fig
5.1.4.3). There is a partition in the slots
between the upper and lower back plates.
To achieve the full adjustment range, the
laterals need to be fitted in the appropriate
H
