Snappi System User Manual
Document No: 053-05 v19
Page 11 of 66
March 2013
Snappi System User Manual.doc
4.1.1 Unfolding the Frame (original locks)
Standing at back of the wheelbase,
place your foot on the rear cross
member X (see Fig 4.1.1.1) and lift
handle labelled Y as far as it will move.
This will open the frame.
Fig 4.1.1.1
Fig 4.1.1.2
Next locate the 2 plastic locking sliders (See
Fig 4.1.1.2). These will be stowed in the
“open” position and are held in place by 2
small spring clips.
Press the 2 silver “Spring pins” in and
slide the 2 locking pieces down over the
lower tube sections. (See Fig 4.1.1.3)
Fig 4.1.1.3
Fig 4.1.1.4
The pins will spring through the holes in the
sliders and hold them in place (see Fig
4.1.1.4).
