Snappi System User Manual
Document No: 053-05 v19
Page 32 of 66
March 2013
Snappi System User Manual.doc
Thread the two top straps through the slots in the back
cover and back plate, from front to back, at the desired
height (Fig 5.6.5)
Thread the webbing through the
cam buckles until the harness is
at the desired height and then
close the cam buckles to secure
the webbing (Fig 5.6.6).
IMPORTANT:
-
In order to ensure that the Butterfly (Chest) harness can not rise up
and cause harm to the user, every time the harness is in use, you must ensure that
all cam buckles/fixings are properly closed and that the harness is correctly
positioned a minimum of 75mm below the user’s neckline. Failure to comply with
this could result in serious injury.
Fig 5.6.5
Fig 5.6.6
